Twin WAN Series – User Guide | v1
Section 4: Advanced PPPoE
The Advanced PPPoE console is required in order to use multiple PPPoE sessions on the
same WAN port. It can also be used to manually connect or disconnect a PPPoE session.
Figure 8
Configuring Load Balancing
WAN Port PPPoE Session
Select the desired Port and Session and then click the
Select
button. The data for the
selected Port/Session will then be displayed in the WAN IP Account section.
WAN IP Account
•
User Name
– Enter the PPPoE user name assigned by your ISP.
•
Password
– Enter the PPPoE password assigned by your ISP.
•
Verify Password
– Re-enter the PPPoE password assigned by your ISP.
•
IP Address
– If you have a fixed IP address, enter it here. Otherwise, this field
should be left at 0.0.0.0.
•
Host Name
– This field is used by a Host to uniquely associate an access
concentrator to a particular Host request.
Action
Use the Connect and Disconnect buttons to establish or terminate a connection on this
session.
Connection Status
This displays the current connection status for each session.
Copyright © 2005 WINS International, LLC dba XiNCOM | All rights reserved.
27
