manualshive.com logo in svg

Xilinx ZC702, Руководство пользователя

Поделиться
Скачать
Xilinx ZC702 Скачать руководство пользователя страница 66

ZC702 Board User Guide

www.xilinx.com

66

UG850 (v1.2) April 4, 2013

Appendix C

Master UCF Listing

Overview

The ZC702 master user constraints file (UCF) template provides for designs targeting the 
ZC702 board. Net names in the constraints listed below correlate with net names on the 
latest ZC702 board schematic. Users must identify the appropriate pins and replace the net 
names below with net names in the user RTL.

Users can refer to the UCF files generated by tools such as Memory Interface Generator 
(MIG) for memory interfaces and Base System Builder (BSB) for more detailed I/O standards 
information required for each particular interface. The FMC connectors J3 and J4 are 
connected to 2.5V V

ADJ

 banks. Because each user’s FMC card implements customer-specific 

circuitry, the FMC bank I/O standards must be uniquely defined by each customer.

Note:

The UCF file listed in this appendix might not be the latest version. Always refer to the ZC702 

Evaluation Kit product page (

www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

) for the 

latest FPGA pins constraints file.

ZC702 Board UCF Listing

#NET  FPGA_DONE           LOC = T12  ; # Bank 0 - DONE_0
#NET  XADC_DXP            LOC = N11  ; # Bank 0 - DXP_0
#NET  XADC_AGND           LOC = K12  ; # Bank 0 - GNDADC_0
#NET  XADC_VCC            LOC = K11  ; # Bank 0 - VCCADC_0
#NET  XADC_VREFP          LOC = M11  ; # Bank 0 - VREFP_0
#NET  XADC_VN_R           LOC = M12  ; # Bank 0 - VN_0
#NET  FPGA_VBATT          LOC = G9   ; # Bank 0 - VCCBATT_0
#NET  FPGA_TCK_BUF        LOC = G11  ; # Bank 0 - TCK_0
#NET  XADC_DXN            LOC = N12  ; # Bank 0 - DXN_0
#NET  XADC_AGND           LOC = L12  ; # Bank 0 - VREFN_0
#NET  XADC_VP_R           LOC = L11  ; # Bank 0 - VP_0
#NET  GND                 LOC = G10  ; # Bank 0 - RSVDGND
#NET  VCC2V5              LOC = T10  ; # Bank 0 - RSVDVCC
#NET  VCC2V5              LOC = T8   ; # Bank 0 - RSVDVCC
#NET  FPGA_INIT_B         LOC = T14  ; # Bank 0 - INIT_B_0
#NET  FPGA_TDI_BUF        LOC = H13  ; # Bank 0 - TDI_0
#NET  JTAG_TDO_BUF        LOC = G14  ; # Bank 0 - TDO_0
#NET  VCC2V5              LOC = T7   ; # Bank 0 - RSVDVCC
#NET  3N579               LOC = T13  ; # Bank 0 - CFGBVS_0
#NET  FPGA_PROG_B         LOC = T11  ; # Bank 0 - PROGRAM_B_0
#NET  FPGA_TMS_BUF        LOC = G12  ; # Bank 0 - TMS_0
NET  PL_PJTAG_TDO_R       LOC = R7   | IOSTANDARD=LVCMOS25; # Bank 13  VCCO - VADJ - IO_0_13
NET  PL_PJTAG_TCK         LOC = V10  | IOSTANDARD=LVCMOS25; # Bank 13  VCCO - VADJ - IO_L1P_T0_13

Содержание ZC702














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды