manualshive.com logo in svg

Xilinx Virtex-5 FPGA ML561, Руководство пользователя

Xilinx Virtex-5 FPGA ML561 - мощный продукт, предлагающий широкие возможности для пользователей. Для удобства пользования, предоставляется User Manual, который можно скачать бесплатно с manualshive.com. Пользователи могут найти подробные инструкции и руководства по использованию продукта для оптимальной производительности.

Поделиться
Скачать
background image

178

www.xilinx.com

Virtex-5 FPGA User Guide

UG190 (v5.0) June 19, 2009

Chapter 5:

Configurable Logic Blocks (CLBs)

Look-Up Table (LUT)

The function generators in Virtex-5 FPGAs are implemented as six-input look-up tables 
(LUTs). There are six independent inputs (A inputs - A1 to A6) and two independent 
outputs (O5 and O6) for each of the four function generators in a slice (A, B, C, and D). The 
function generators can implement any arbitrarily defined six-input Boolean function. 
Each function generator can also implement two arbitrarily defined five-input Boolean 
functions, as long as these two functions share common inputs. Only the O6 output of the 
function generator is used when a six-input function is implemented. Both O5 and O6 are 
used for each of the five-input function generators implemented. In this case, A6 is driven 
High by the software. The propagation delay through a LUT is independent of the function 
implemented, or whether one six-input or two five-input generators are implemented. 
Signals from the function generators can exit the slice (through A, B, C, D output for O6 or 
AMUX, BMUX, CMUX, DMUX output for O5), enter the XOR dedicated gate from an O6 
output (see 

“Fast Lookahead Carry Logic”

), enter the carry-logic chain from an O5 output 

(see 

“Fast Lookahead Carry Logic”

), enter the select line of the carry-logic multiplexer 

from O6 output (see 

“Fast Lookahead Carry Logic”

), feed the D input of the storage 

element, or go to F7AMUX/F7BMUX from O6 output.

In addition to the basic LUTs, slices contain three multiplexers (F7AMUX, F7BMUX, and 
F8MUX). These multiplexers are used to combine up to four function generators to provide 
any function of seven or eight inputs in a slice. F7AMUX and F7BMUX are used to 
generate seven input functions from LUTs A and B, or C and D, while F8MUX is used to 
combine all slices to generate eight input functions. Functions with more than eight inputs 
can be implemented using multiple slices. There are no direct connections between slices 
to form function generators greater than eight inputs within a CLB or between slices.

Storage Elements

The storage elements in a slice can be configured as either edge-triggered D-type flip-flops 
or level-sensitive latches. The D input can be driven directly by a LUT output via 
AFFMUX, BFFMUX, CFFMUX or DFFMUX, or by the BYPASS slice inputs bypassing the 
function generators via AX, BX, CX, or DX input. When configured as a latch, the latch is 
transparent when the CLK is Low.

The control signals clock (CK), clock enable (CE), set/reset (SR), and reverse (REV) are 
common to all storage elements in one slice. When one flip-flop in a slice has SR or CE 
enabled, the other flip-flops used in the slice will also have SR or CE enabled by the 
common signal. Only the CLK signal has independent polarity. Any inverter placed on the 
clock signal is automatically absorbed. The CE, SR, and REV signals are active High. All 
flip-flop and latch primitives have CE and non-CE versions.

The SR signal forces the storage element into the state specified by the attribute SRHIGH or 
SRLOW. SRHIGH forces a logic High at the storage element output when SR is asserted, 
while SRLOW forces a logic Low at the storage element output. When SR is used, an 
optional second input (DX) forces the storage element output into the opposite state via the 
REV pin. The reset condition is predominant over the set condition (see 

Figure 5-5

). 

Table 5-3

 and 

Table 5-4

 provide truth tables for SR and REV depending on whether 

SRLOW or SRHIGH is used.

Table 5-3:

Truth Table when SRLOW is Used (Default Condition)

SR

REV

Function

0

0

No Logic Change

0

1

1

Содержание Virtex-5 FPGA ML561


































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Virtex-5 FPGA ML561

LSI MegaRAID SATA 300-4XLP Quick Installation Manual preview
MegaRAID SATA 300-4XLP
Бренд: LSI Страницы: 3
National Instruments Fieldpoint cFP-RTD-124 Operating Instructions Manual preview
Fieldpoint cFP-RTD-124
Бренд: National Instruments Страницы: 15
MSNswitch UIS-322b Quick Installation Manual preview
UIS-322b
Бренд: MSNswitch Страницы: 2
Supero AOC-1UIPMI-B User Manual preview
AOC-1UIPMI-B
Бренд: Supero Страницы: 53
TDK Powereta iQP Series Product Brief preview
Powereta iQP Series
Бренд: TDK Страницы: 2
Data Translation DT9835 Getting Started Manual preview
DT9835
Бренд: Data Translation Страницы: 62
Adaptec RAID 5085 Release Notes preview
RAID 5085
Бренд: Adaptec Страницы: 2
SMC Sierra Monitor FPC-N38 Startup Manual preview
FPC-N38
Бренд: SMC Sierra Monitor Страницы: 43
IBM 32R1860 - Nortel Layer 2/3 Copper GbE Switch... User Manual preview
32R1860 - Nortel Layer 2/3 Copper GbE Switch...
Бренд: IBM Страницы: 14
ZALMAN CNPS9900 Max User Manual preview
CNPS9900 Max
Бренд: ZALMAN Страницы: 9
ZALMAN CNPS7000B Series User Manual preview
CNPS7000B Series
Бренд: ZALMAN Страницы: 9
Olivella Modular Signos User Manual preview
Signos
Бренд: Olivella Modular Страницы: 19
Cirrus Logic Crystal CS98000 Series Manual preview
Crystal CS98000 Series
Бренд: Cirrus Logic Страницы: 40
Smartenit ZBRE Quick Start Manual preview
ZBRE
Бренд: Smartenit Страницы: 2
Abocom LA100 Quick Installation Manual preview
LA100
Бренд: Abocom Страницы: 20
Fastwel CPC514 User Manual preview
CPC514
Бренд: Fastwel Страницы: 45
Jands SNVR-8004ST User Manual preview
SNVR-8004ST
Бренд: Jands Страницы: 20
Jameco Electronics Rabbit 2000 User Manual preview
Rabbit 2000
Бренд: Jameco Electronics Страницы: 349

Бренды по названию

Популярные бренды

Загрузить еще бренды