Xilinx LogiCore PLB PCI Full Bridge Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 58

background image

PLB PCI Full Bridge (v1.00a)

52

www.xilinx.com

DS508 March 21, 2006

Product Specification

EARL

Y ACCESS

The constraints are also implemented automatically in the EDK tool flow with any tool option that
invokes bridge synthesis. In this flow, tcl-scripts generate the ucf-file constraints and place them in a
file in the OPB PCI Bridge directory of the project implementation directory. The ucf-file constraints are
then included in the ngc-file generated in the EDK tool flow. The user can check the ucf-file in the
implementation directory of the bridge directory to verify that the constraints are included. As noted
above, the user can include all constraints in the top-level ucf-file. When the constraints are included in
both the top-level ucf-file and the bridge ngc-file (via the bridge directory ucf-file), then the top-level
ucf-file overrides any conflicting constraints in the bridge ngc-file.

To remind the user that the following constraints must be included, PLATGEN will generate the
message:

The OPB PCI Bridge design requires design constraints to guarantee performance.

Please refer to the OPB IPIF/LogiCORE PCI64 v3.0 bridge design data sheet for

details.

Additional bridge specific constraints are required and an example ucf-file is provided in the EDK
pcores library. To remind the user that the additional bridge related constraints must be included in the
top-level ucf-file, PLATGEN will generate the message:

An example UCF is available for this core and must be modified for use in the

system. Please refer to the EDK Getting Started guide for the location of this

file.

The constraints that the LogiCORE PCI64 v3.0 core require to meet PCI specifications are shown below.

All io buffers must have IOB=TRUE

IOSTANDARD must explicitly list PCI33_3. Both BYPASS IOBDELAY=BOTH must be included for all
PIC ports, as shown below.

NET "PCI_AD(*)" IOSTANDARD=PCI33_3;

NET "PCI_CBE(*)" IOSTANDARD=PCI33_3;

NET "PCI_PAR" IOSTANDARD=PCI33_3;

NET "PCI_FRAME_N" IOSTANDARD=PCI33_3;

NET "PCI_TRDY_N" IOSTANDARD=PCI33_3;

NET "PCI_IRDY_N" IOSTANDARD=PCI33_3;

NET "PCI_STOP_N" IOSTANDARD=PCI33_3;

NET "PCI_DEVSEL_N" IOSTANDARD=PCI33_3;

NET "PCI_PERR_N" IOSTANDARD=PCI33_3;

NET "PCI_SERR_N" IOSTANDARD=PCI33_3;

#Include next 2 if routed to pins

NET "IDSEL" IOSTANDARD=PCI33_3;

NET "GNT_N" IOSTANDARD=PCI33_3;

NET "PCI_AD(*)" BYPASS;

NET "PCI_CBE(*)" BYPASS;

NET "PCI_PAR" BYPASS;

NET "PCI_FRAME_N" BYPASS;

NET "PCI_TRDY_N" BYPASS;

NET "PCI_IRDY_N" BYPASS;

NET "PCI_STOP_N" BYPASS;

NET "PCI_DEVSEL_N" BYPASS;

NET "PCI_PERR_N" BYPASS;

NET "PCI_SERR_N" BYPASS;

#

«
...
50
51
52
53
54
...
»

Содержание LogiCore PLB PCI Full Bridge



























































Отзывы:

Нет отзывов

Похожие инструкции для LogiCore PLB PCI Full Bridge

Бренд: Udoo Страницы: 7

Бренд: VAF instruments Страницы: 56

Бренд: Yamaha Страницы: 4

Бренд: Salto Страницы: 2

Бренд: NXP Semiconductors Страницы: 24

Brocade X6-8 Director

Бренд: Broadcom Страницы: 207

Бренд: SUNRICH TECHNOLOGY Страницы: 5

AXP-100H MUSCLE

Бренд: Thermalright Страницы: 36

Бренд: ZALMAN Страницы: 8

PCMCIA High Speed Serial Card CE 232HSPCC

Бренд: B&B Electronics Страницы: 14

Бренд: IEI Technology Страницы: 4

Бренд: ZALMAN Страницы: 18

Бренд: Procool Страницы: 2

Developer's Board

Бренд: Sony Ericsson Страницы: 28

COM Express conga-TC87

Бренд: Congatec Страницы: 114

Kontron CP3005 Series

Бренд: S&T Страницы: 115

Braswell Series

Бренд: Intel Страницы: 54

Бренд: BOSER Technology Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды