manualshive.com logo in svg

Xilinx DS610, Техническое описание, Страница: 62 / 101

Поделиться
Скачать
Xilinx DS610 Скачать руководство пользователя страница 62

DS610 (v3.0) October 4, 2010

www.xilinx.com

Product Specification

62

© Copyright 2007–2010 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE, and other designated brands included herein are trademarks of Xilinx in the United States and 
other countries. PCI and PCI-X are trademarks of PCI-SIG and used under license. All other trademarks are the property of their respective owners.

Introduction

This section describes how the various pins on a Spartan®-3A DSP FPGA connect within the supported component 
packages and provides device-specific thermal characteristics. For general information on the pin functions and the package 
characteristics, see the 

Packaging

 section in 

UG331

:

 Spartan-3 Generation FPGA User Guide.

Spartan-3A DSP FPGAs are available in both standard and Pb-free, RoHS versions of each package, with the Pb-free 
version adding a “G” to the middle of the package code. Except for the thermal characteristics, all information for the 
standard package applies equally to the Pb-free package.

Pin Types

Most pins on a Spartan-3A DSP FPGA are general-purpose, user-defined I/O pins. There are, however, up to 12 different 
functional types of pins on Spartan-3A DSP packages, as outlined in 

Table 57

. In the package footprint drawings that follow, 

the individual pins are color-coded according to pin type as in the table.

101

Spartan-3A DSP FPGA Family:

Pinout Descriptions

DS610 (v3.0) October 4, 2010

Product Specification

Table  57:

Types of Pins on Spartan-3A DSP FPGAs

Type/Color 

Code

Description

Pin Name(s) in Type

I/O

Unrestricted, general-purpose user-I/O pin. Most pins can be paired together to form 
differential I/Os. 

IO_#
IO_Lxxy_# 

INPUT

Unrestricted, general-purpose input-only pin. This pin does not have an output structure, 
differential termination resistor, or PCI clamp diode.

IP_#
IP_Lxxy_#

DUAL

Dual-purpose pin used in some configuration modes during the configuration process and 
then usually available as a user I/O after configuration. If the pin is not used during 
configuration, this pin behaves as an I/O-type pin. See 

UG332

: 

Spartan-3 Generation 

Configuration User Guide

 for additional information on these signals.

M[2:0]
PUDC_B
CCLK
MOSI/CSI_B
D[7:1]
D0/DIN
CSO_B
RDWR_B
INIT_B
A[25:0]
VS[2:0]
LDC[2:0]
HDC

VREF

Dual-purpose pin that is either a user-I/O pin or Input-only pin, or, along with all other VREF 
pins in the same bank, provides a reference voltage input for certain I/O standards. If used for 
a reference voltage within a bank, all VREF pins within the bank must be connected.

IP/VREF_# 
IP_Lxxy_#/VREF_#
IO/VREF_# 
IO_Lxxy_#/VREF_#

CLK

Either a user-I/O pin or an input to a specific clock buffer driver. Packages have 16 global clock 
inputs that optionally clock the entire device. The RHCLK inputs optionally clock the right half 
of the device. The LHCLK inputs optionally clock the left half of the device. See the Using 
Global Clock Resources chapter in 

UG331

: 

Spartan-3 Generation FPGA User Guide 

for 

additional information on these signals.

IO_Lxxy_#/GCLK[15:0],
IO_Lxxy_#/LHCLK[7:0],
IO_Lxxy_#/RHCLK[7:0]

CONFIG

Dedicated configuration pin, two per device. Not available as a user-I/O pin. Every package 
has two dedicated configuration pins. These pins are powered by VCCAUX. See the 

UG332

: 

Spartan-3 Generation Configuration User Guide

 for additional information on the DONE and 

PROG_B signals. 

DONE, PROG_B

Содержание DS610






































































































Отзывы:

Нет отзывов