manualshive.com logo in svg

Xilinx Alveo U200, Руководство по началу работы

Поделиться
Скачать
Xilinx Alveo U200 Скачать руководство пользователя страница 24

IMPORTANT! The installation packages referenced here are being updated regularly and the file
names frequently change. If you copy and paste any commands from this user guide, be sure to update
the placeholders in those commands to match the downloaded packages.

IMPORTANT! Les packages d'installation référencés ici sont mis à jour régulièrement et les noms de

fichier changent fréquemment. Si vous copiez et collez des commandes de ce guide, veillez à mettre à
jour les espaces réservés dans ces commandes pour qu'ils correspondent aux packages téléchargés.

Wichtig! Die hier genannten Installationspakete werden regelmäßig aktualisiert und die Dateinamen
ändern sich häufig. Wenn Sie Befehle aus diesem Benutzerhandbuch kopieren und einfügen, müssen
Sie die Platzhalter in diesen Befehlen entsprechend den heruntergeladenen Paketen aktualisieren.

1. Download both the Xilinx

®

 runtime (XRT) and deployment shell installation packages

associated with your card from the Getting Started tab in one of the following locations:

•

Alveo U200 Product Page

•

Alveo U250 Product Page

•

Alveo U280 Product Page

2. Install the XRT installation package using the following command, where 

<deb-dir>

 is the

directory where the DEB packages were downloaded in the previous step and 

<version>

 is

the latter part of the XRT file name.

$ sudo apt install <deb-dir>/xrt_<version>.deb

This will install the XRT along with any necessary dependencies. Follow the instructions
when prompted throughout the installation.

3. Install the deployment shell installation packages required for the card.

• For U200:

$ sudo apt install <deb-dir>/xilinx-u200-xdma-<version>.deb

• For U250:

$ sudo apt install <deb-dir>/xilinx-u250-xdma-<version>.deb

• For U280:

$ sudo apt install <deb-dir>/xilinx-u280-es1-xdma-<version>.rpm

The deployment software sources are now installed and deployed on the system. The
installation of the drivers, runtime software, and utilities are in the 

/opt/xilinx/

 directory

and contains the 

xrt

 and 

dsa

 sub-directories. Note that the 

dsa

 folder contains the

deployment shell installation.

Chapter 4: Installing the Deployment Software

UG1301 (v1.3) February 12, 2019

 

www.xilinx.com

Getting Started with Alveo Accelerator Cards

 24

Send Feedback

Содержание Alveo U200




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды