Xilinx Alveo U200 Скачать руководство пользователя страница 22

Страница: 22 / 51

•

Alveo U280 Product Page

5. Install the XRT installation package using the following command, where

<rpm-dir>

is the

directory where the RPM packages were downloaded in the previous step, and

is the latter part of the XRT file name.

$ sudo yum install <rpm-dir>/xrt_<version>.rpm

This will install the XRT and its necessary dependencies. Follow the instructions when
prompted throughout the installation.

6. Install the deployment shell installation package required for the card.

• For U200:

$ sudo yum install <rpm-dir>/xilinx-u200-xdma-<version>.rpm

• For U250:

$ sudo yum install <rpm-dir>/xilinx-u250-xdma-<version>.rpm

• For U280:

$ sudo yum install <rpm-dir>/xilinx-u280-es1-xdma-<version>.rpm

The deployment software sources are now installed on the system. The installation of the
drivers, runtime software, and utilities are in the

/opt/xilinx/

directory and contains the

xrt

and

dsa

sub-directories. Note that the

dsa

folder contains the deployment shell

installation.

7. After installing the deployment shell, the terminal instructs you to flash the card by running a

command listed in the output, as shown in the example below. Do NOT run this command.
You will manually generate the correct command in a subsequent step.

DSA package installed successfully.

Please flash card manually by running below command:

sudo /opt/xilinx/xrt/bin/xbutil flash -a <shell_name> -t <timestamp>

8. Cold boot your machine by fully powering it off and then on.

9. Follow the instructions in

Appendix C: Generating the xbutil flash Command

to manually

generate the correct

xbutil flash

command, which includes the

-d

option to specify the

card in the server to be flashed, as shown below. The

-a

and

-t

options specify the

deployment shell name and timestamp associated with the specific card ID.

sudo /opt/xilinx/xrt/bin/xbutil flash -a <shell_name> -t <timestamp> -d

<card_ID>

CAUTION! Not specifying the card ID within the

xbutil flash

command via the

-d

option can

result in damage to the card.

10. Run the manually generated

xbutil flash

command.

If you have multiple cards installed on the server, you MUST run the

xbutil flash

command separately for each card.

Chapter 4: Installing the Deployment Software

UG1301 (v1.3) February 12, 2019

www.xilinx.com

Getting Started with Alveo Accelerator Cards

Send Feedback

Содержание Alveo U200




















































Результаты поиска

Содержание Alveo U200

Отзывы:

Бренды по названию

Популярные бренды

Xilinx Alveo U200, Руководство по началу работы

Результаты поиска

Содержание Alveo U200

Отзывы:

Бренды по названию

Популярные бренды