3.3 Functions Operating Instructions
3.3.1: Set the current operating frequency
Method 1: Press the front panel UP / DN button, move to the desired frequency step
bit, then rotate the frequency knob to change the current frequency value.
Method 2: On the multifunction digital microphone in hand, Press
and then enter the frequency directly, such as: 14.27
then press the F-INP ENT button again to complete the frequency
3.3.2: Mode Switching
Method 1: Press the frequency knob to switch the current menu page, then press [MODE].
Press corresponding multifunction button, to complete mode switching.
Method 2: On the multifunction digital microphone in hand, press
to complete the mode switching.
3.3.3:
Filter Switching
Method 1: Press the frequency knob to switch the current menu page, then press [BW].
Press corresponding multifunction button to complete filter switching.
Method 2: On the multifunction digital
to complete filter switching.
3.3.4: Preamplifier on/off
Press the frequency knob to switch the current menu page, then press [
When the preamplifier is on, PRE will be highlighted green. When the preamplifier
PRE will appear dark.
3.3.5: Attenuator on/off
Press the frequency knob to switch the current menu page, then press [
When the attenuator is on, ATT will be highlighted green. When the attenuator
7
/
12
Functions Operating Instructions
Set the current operating frequency
: Press the front panel UP / DN button, move to the desired frequency step
rotate the frequency knob to change the current frequency value.
: On the multifunction digital microphone in hand, Press
and then enter the frequency directly, such as: 14.27
INP ENT button again to complete the frequency settings.
: Press the frequency knob to switch the current menu page, then press [MODE].
Press corresponding multifunction button, to complete mode switching.
: On the multifunction digital microphone in hand, press
to complete the mode switching.
frequency knob to switch the current menu page, then press [BW].
Press corresponding multifunction button to complete filter switching.
: On the multifunction digital microphone in hand, press
Press the frequency knob to switch the current menu page, then press [
When the preamplifier is on, PRE will be highlighted green. When the preamplifier
Press the frequency knob to switch the current menu page, then press [
When the attenuator is on, ATT will be highlighted green. When the attenuator
: Press the front panel UP / DN button, move to the desired frequency step-bit
rotate the frequency knob to change the current frequency value.
settings.
: Press the frequency knob to switch the current menu page, then press [MODE].
Press corresponding multifunction button, to complete mode switching.
frequency knob to switch the current menu page, then press [BW].
Press corresponding multifunction button to complete filter switching.
Press the frequency knob to switch the current menu page, then press [PRE].
When the preamplifier is on, PRE will be highlighted green. When the preamplifier is off,
Press the frequency knob to switch the current menu page, then press [ATT].
When the attenuator is on, ATT will be highlighted green. When the attenuator is off,
