6
/
12
3.2
Menu Functions:
【
PRE
】
Switch receive preamp on or off.
【
ATT
】
Switch receive signal attenuator on or off.
【
MODE
】
Select desired operating mode – CW/AM/LSB/USB.
【
AGC
】
Select AGC level – FAST/SLOW/OFF.
【
NB
】
Select NB level between 1 and 4.
------------------------------------------------------------------------------------------------------------------------------------------------
【
A/B
】
Switch between VFO A & VFO B.
【
A=B
】
Set VFO A the same as VFO B.
【
SPLT
】
Select SPLIT operating mode.
【
RIT
】
Select RIT mode – adjust via selector knob B,
setting shown on RIT display in LCD.
【
POW
】
Set RF output power – adjust via selector knob B,
level displayed via red line in LCD.
------------------------------------------------------------------------------------------------------------------------------------------------
【
V/M
】
Select VFO or Memory mode. Select
channel/frequency using selector knob B.
【
M>V
】
In memory mode, move current
frequency to VFO and switch to VFO mode.
【
MW
】
In VFO mode, store current frequency
and settings in memory.
【
MC
】
In memory mode, clear selected
memory channel.
【
BW
】
Select Bandwidth – 0.5/2.2/15 kHz.
------------------------------------------------------------------------------------------------------------------------------------------------
【
KEY
】
Select keyer – Manual/Auto L/Auto R.
【
KSPD
】
Select keying speed - adjust via selector
knob B, speed displayed under KEY in LCD.
【
TIME
】
Set Internal Clock – adjust via selector
knob B, select hour/minute with Up/Down buttons.
【
SQL
】
Select to adjust Squelch level via selector
knob B, level shown on line display in LCD.
【
VCMP
】
voice compression settings
