XIEGU G90S, Руководство пользователя

Страница: 12 / 39

Functions of Panel Keys and Switching
Button First function (short press, cycle) Second function (FUNC+) Long press
PRE/ATT PRE - ATT - direction connection / /
CMP/F-L Turn it on to transmit voice compression
Digital filter F-L, low-pass cutoff frequency
selection
Reset
parameters
NB/F-H NB SW-NB Level-NB Width
Digital filter F-H, high-pass startup
frequency selection
Reset
parameters
AGC/SPL Open AGC, F-S+A close and circulating
Turn on the pilot frequency transceiver
operation mode
RF GAIN
VM. Switch frequency mode or channel mode /
Call Sign
Editor
MW/MC Turn on channel memory function Channel clearing /
A/B.A>B Switch between VFO-A and VFO-B
Copy the current VFO to the background
VFO
/
TUNE Turn on/off the antenna tuning function /
Antenna
tuning
POW
POWER Transmitting Power Setting MICGAIN
Hand microphone MIC
gain setting
Standing-wave
scanning
SWR THR
Standing-wave protection
threshold setting
INPUT Voice input mode selection
KEY
SPEED Automatic key rate setting CW Volum Side tone volume setting
CW automatic
decoding
M/L/R
Manual/automatic left and right
mode switching
CW TONE Side tone frequency setting
MODE iambic A/B mode switching /
QSK Insert/non-insert selection /
QSK Time Insertion time setting /
Ratio
Setting of automatic key
dot-and-dash interval
proportion
/
LOCK /
SCALE
Spectrum reference level
setting
Lock button
AVE FFT
Mean value setting, ranged
1~10
Volume knob Loudspeaker / earphone switching
VOX ON/OFF Voice control switch /
VOX GAIN Voice control gain setting /
ANTI-VOX
Hand microphone and
speaker echo suppression
setting
/
VOX DLY
Voice control transmission
turnoff delay
/
Multi-knob
Filter center mode setting / /
Filter bandwidth mode setting / /
Main knob Frequency step selection Open RIT /
The operation of the second function:

Press the [FUNC] key first, then the F indicator will be on, then press the
corresponding function key.

Press the [FUNC] key again to exit the second function. At this time, the F
indicator is off.
■ In any function (including FUNC second function) setting interface, short
press the main knob to save, exit the function setting and return to the main
interface.
12