XIEGU G90, Руководство по эксплуатации

Страница: 28 / 58

The muting strength gradually increases from S1 ~S9, corresponding to signal
strength. For example, when the muting level is set to be S3. it indicates that
the speaker will only let sound through when the signal strength is more than
S3. Otherwise, the speaker will remain silent.
Adjustment of RF Gain and Mu�ng Level
Proper RF gain adjustment can improve the quality of a received signal. In
general, reducing the RF gain level on the low bands (40/60/80/160m) which
have strong interference can significantly improve receive quality.
In general, with SDR rigs, operating at full RF gain is detrimental to receive
signal quality. Experiment with levels to find what is best for you.
How to adjust the RF gain:
1. Apply a long press on the [AGC] bu�on at the bo�om of the screen to
enable the se�ng of RFGAIN.
2. Rotate the main tuning knob to adjust the RF gain value.
3.
A�er se�ng your RF gain level, press the main knob inwards momentarily
to exit the RF gain se�ng mode
.
SQL se�ng
You set the Squelch level when you want to mute sta�c in between
transmissions normally on AM or FM modes
.
Squelch Opera�on (Prior to Firmware v 1.75)
1. Apply a long press on the [Mul�-func�on Adjustment Knob] to enter the
user defined func�on menu. Rotate the main knob to select the SQL Level
op�on.
2. Rotate the [Mul�-func�on Adjustment Knob] to set the squelch mu�ng
level. At the same �me, the mu�ng level will show on the S meter.
3. Momentarily press the bu�on below the SAVE label at the bo�om of the
screen to select and exit.
VISIT RADIODDITY.COM FOR DOWNLOADS AND HELP 20