Page 9
I
NSTRUCTIONS FOR EXTERNAL INTERFACE CONNECTIONS
(2) RJ10 MIC
interface
Note:
There is a bias voltage on the MIC
cable (pin 2). Avoid shorting it to ground.
(15)
COM
interface
(13)
ACC
interface
(12) Key
wiring
diagram
Connect your straight key/paddle Morse key
according to the diagram shown in the figure
above.
Note:
If the connector on your straight key is
a 6.5mm 2-pole plug, please change it
to a 3-pole 3.5mm stereo plug following
the wiring shown in the figure above,
and connect the live wire of the Morse
key to either the "Di" or "Da" terminal.
Note:
Direct use of some2-pole to 3-pole
Adapters or incorrect wiring may result
in the radio sticking in CW transmit
mode.
