3. Handlebar adjustment
Adjusting screw
Divisions for adjusting
the height of the
handlebar
Loosen the adjusting screw, rotate the wheel, adjust
the required height.
4. Adjusting the brake lever
Screw setting
Divisions for
installing the brake
lever
Loosen the adjusting screw, turn the brake handle and adjust it according to the
special divisions, as shown in the picture on the left. Then tighten the adjusting
screw (the illustration shows an example of setting the brake handle only on one
side of the handlebar, in the same way, adjust the brake knob on the other side).
5. Installing the rudder control
panel
6. Front cataphot installation
7. Turn the bicycle over
To make sure that the bike is stable by placing it upside down, the
brake pads and bell should not touch the surface.
8. Fitting the front wheel
Unscrew the nut
When installing, pay
attention to the direction
of the front wheel, the tire
protector indicates the
direction of the wheel.
The direction of the tread
must match the direction
indicator on the sticker.
The direction of the tread
must match the direction
indicator on the sticker.
Insert the front wheel into the
front fork, securely tighten
the nut.
05
06
