This version is for private use only and should not be distributed.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installationi. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
FCC Note
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed
and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The
exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption
Rate, or SAR.
The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets
the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device
a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear,
position the handset a minimum of 1.0 cm from your body when the device is switched on.
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV technician for help.
E-label
This device has an electronic label for certification information.
To access it, please select Settings> About Phone >Regulatory labels or select Settings, then type
“Regulatory labels ”into the search bar.
Certification Information (Highest SAR)
SAR 10g limit: 2.0 W/Kg, SAR Value: Head: 0.301 W/Kg,
Body: 1.097 W/Kg (5 mm distance).
SAR 1g limit: 1.6W/Kg, SAR Value: Head: 1.03 W/Kg,
Body-worn: 0.99 W/Kg (10 mm distance).
Hotspot: 1.07 W/Kg (10 mm distance).
Disclaimer
Model: M1906F9SH
1906 indicates that this product will be launched after 201906
This User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this
User Guide necessitated by typographical errors, inaccuracies of current information, or improvements to
programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will,
however, be incorporated into new editions of this User Guide. All illustrations are for illustration purposes
only and may not accurately depict the actual device.
06
