TUTA-B1 GSM REMOTE CAMERA USER MANUAL
42
power supply to charge the built-in Lithium battery for 4 hours every 3 months if
the camera does not use for long time. Charge the battery at least 12 hours at
the first time use to achieve the full performance of the battery.
Chapter 7 General troubleshooting
No.
General Trouble
Possible Reason
Solution
1
Can
’
t
start
camera
(Indicator is working)
Other master is already set in the
camera.
Recover to factory default
setting.
2
All functions disable
(Indicator is working)
Caller ID presentation or MMS
functions of the SIM card do not
active, insufficient fee of the SIM
card.
Contact network provider to
active SIM card function. Pay
for the card.
3
Indicator constant light
in red color.
Can
’
t find or identify the SIM card.
SIM card no install properly:
Power off the camera and
check it again.
4
Camera didn
’
t
response of any
operation.
TUTA camera work abnormally.
Switch off the power, check
SIM card, or reset factory
setting.
5
After starting the
camera, indicator
flashed in red color
and can not turn to
green.
Network signal weak or network
busy.
Place the camera at other
place with strong signal and
try again.
SIM card PIN code actives.
Close the PIN code.
SIM card invalid.
Contact with local operator to
check of it.
6
Remote control can
’
t
work. Or action slowly.
Or control distance
range shortened.
Camera low power.
Connect external power to
recharge the battery.
Remote control low power.
Change remote control
battery.
Didn
’
t pull out the antenna.
Pull out remote control
antenna.
Two remote control work
simultaneously.
Try only one remote control.
7
Can
’
t add new remote
control
or
wireless
sensor
The remote control or sensor
already studies successfully.
Exit the loading status.
The sensor quantity is already
reaches its max number.
Delete old sensors before add
new sensor.
Didn
’
t set master user number
Set master number before
add sensor.
8
Can
’
t start the camera Battery runs out of power.
Connect
the
camera
to