MLP2 User Manual
10
3.2 Battery Charging
(Varies by local or region)
When Li-polymer battery runs out of power, blue power LED and green status LED flash slowly.
It will power off automatically when continues printing. If you want to go on, please charge it.
Charging method: Plug in socket (220V, 50Hz) with power charger.
Power-off charging: Status LED will always indicate blue color and goes off when fully charged.
Power-on charging: Status LED will keep blinking in blue color, and always indicate blue color
when fully changed.
Printer could be in use when charging.
NOTES
:
Please use the manufacturers power charger, otherwise cause to printer damage and
battery leakage, light and/or explosion.
If battery is not in use for a long time,please remove it after fully charged,and then it should
be recharged every 3 months, when power is low,battery should be charged in time.
If the printer automatically power down because of low power,be sure to charge the
battery in 15 days. Otherwise, it will cause permanent damage to the battery.
Содержание MLP2
Страница 10: ...MLP2 User Manual 6 1 2 Appearance...