LPQ58/LPQ80
User Manual
Rev.1.3
18
If you wants to change it, press
【
POWER
】
button to switch the setting value and the printer
will prints out the current setting:‘ density: ***** ’.When the value is required, press the
【
FEED
】
button once to confirm and quit, then enter the forth setting -print width setting.
Optional density:
0(Lowest), 1( low), 2(middle), 3(high), 4(highest).
4. After entering print width setting mode, it prints the following contents:
The default print width is default(384dots),when the print width does not need to be changed,
press the
【
FEED
】
button once to quit the current menu and enter the next settings.
If you wants to change it, press
【
POWER
】
button to switch the setting value and the printer
will prints out the current setting:‘ print width: ***** ’.When the value is required, press the
【
FEED
】
button once to confirm and quit, then enter the last setting –print protocol setting.
Optional printing width: default (384dots) and full area (448dots)
.
5. After entering protocol setting mode, it prints the following contents:
（
NOTE
：
This mode is
only available when you use label paper.
）
The default protocol is TSPL, when the protocol does not need to be changed, press the
【
FEED
】
button once to quit and then printer will automatically power off .
If you wants to change it, press
【
POWER
】
button to switch the setting value and the printer
will prints out the current setting: protocol :‘***** ’.When the value is required, press the
【
FEED
】
button once to confirm and quit, then printer will automatically
【
POWER
】
off.
Optional protocol: TSPL, ESC/POS
NOTES: When receipt paper is used , only ESC/POS protocol is accessiable.
When label paper is used, protocol type can be set to either ESC/POS or TSPL.
6. Power on, then above settings take effect.
Set protocol
：
Protocol: TSPL
Set print width mode:
Print width: default
