LPQ58/LPQ80
User Manual
Rev.1.3
17
The default baud rate is 9600, when the baud rate does not need to be changed, press the
【
FEED
】
button once to quit the current menu and enter the next settings.
If you wants to change it, press
【
POWER
】
button to switch the setting value and the printer
will prints out the current setting: ‘baud= ***** ’. when the value is required, press the
【
FEED
】
button once to confirm and quit, then enter the second setting – paper type setting.
Optional baud rates: 9600, 19200, 38400,57600, 115200.
2. After entering paper typesetting mode, it prints the following contents:
The default paper type is label, when the paper type does not need to be changed, press the
【
FEED
】
button once to quit the current menu and enter the next settings.
If you wants to change it, press
【
POWER
】
button to switch the setting value and the printer
will prints out the current setting:‘ paper type: ‘ ***** ’.When the value is required, press the
【
FEED
】
button once to confirm and quit, then enter the third setting – print density setting
Optional paper type: receipt, label, black mark and auto.
Note:
Under auto mode, printer feeds paper automatically to identify the media type after power
on.
Under label mode, the default label height is 120mm. Max label height which can be located
by printer is 400mm. It can be modified according to the user ’s need by printer utility tool.
See more information in <<Printer Utility Tool Manual>>.
Under black mark mode, the default gap is 300mm. Max label gap which can be located by
printer is 400mm. It can be modified according to the user ’s need by printer utility tool. See
more information in <<Printer Utility Tool Instructions>>.
3. After entering density setting mode, it prints the following contents:
The default density is 2, when the density does not need to be changed, press the
【
FEED
】
button once to quit the current menu and enter the next settings.
Setting density:
Density:2
Setting paper type
：
Paper type: Label
Enter setting mode:
Setting baud:
Baud = 9600
