background image

 10 / 20 

19.  Stay alert, watch what you are doing and use 

common sense when operating. Do not use a 
winch while you are tired or under the influence of 
drugs, alcohol or medication. A moment of 
inattention while operating winches may result in 
serious personal injury. 

20.  Do not overreach. Keep proper footing and 

balance at all times. This enables better control of 
the winch in unexpected situations. 

21.  Hook onto the object using a pulling point, tow 

strap or chain. Do not wrap the wire rope around 
the object and hook onto the wire rope itself. This 
can cause damage to the object being pulled, and 
kink or fray the wire rope. 

22. 

Do not use a Recovery Strap while winching. 

They are designed to stretch and can suddenly 
whip back towards the operator during a winching 
operation. 

23.  Secure load after moving. 

NO LOCKING MECHANISM. 

24.  Keep at least 5 full turns of wire rope on drum. 

The wire rope

’s connection to the drum is not 

intended to sustain a load, without the added 
support from the friction of at least 5 full turns of 
wire rope. 

25.  Wrap wire rope under 500 lb. tension before use. 

Otherwise, wire rope may bind during operation. 

26.  Keep clear of wire rope, hook, and load while 

winching. Do not step over wire rope. 

Do not push sideways against wire rope 
under tension; wire rope might break under 
this load and recoil back, striking the person 
pushing against it or a bystander. 

27.  If wire rope begins to get entangled, stop winch 

immediately and release wire rope using switch. 

28.  Do not submerge winch in water. 

If winch gets submerged accidentally, it needs to 
be immediately disassembled, cleaned, dried and 
re-lubricated by a qualified technician to prevent 
permanent damage from corrosion. 

29.  Only winch with the winching vehicle

’s 

transmission in neutral. Winching with a vehicle

’s 

transmission in gear or park may damage the 
transmission. A vehicle

’s transmission is not 

designed to handle that type of load. 

 

30.  Do not operate the winch at extreme angles. 

Do not exceed the angles shown in Figure B for a 
roller fairlead. For a hawse fairlead, the angle 
should be as close to straight as possible. 

 

Figure B: Roller fairlead Maximum Winching Angles 

31.  If the object to be pulled must be pulled at an 

angle in relation to the winch, use a pulley (sold 
separately) and an anchor point directly in front of 
the winch, as shown in Figure C, to keep the Wire 
Rope pull straight. 

 

32.  Broken strands of wire rope will be sharp. 

Wear heavy-duty work gloves when handling the 
wire rope. Do not slide wire rope through hands, 
even with gloves on. 

33.  Winch motor will be hot during and after use. 

Keep clear. 

34.  Do not power the hook all way into the fairlead or 

winch. 

35.  People with pacemakers should consult their 

physician(s) before use. Electromagnetic fields in 
close proximity to heart pacemaker could cause 
pacemaker interference or pacemaker failure. 

 

Figure C: Pulley anchoring 

Содержание 9500LB





















Отзывы: