9
Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0
IMPORTANT
Before you begin this step, it is assumed that the CN3200 Dual Band Routing Modem has been
configured as described in the
CN3200 Dual Band Routing Modem Installation Guide
. This was
completed by the device installer.
These steps connect the CN3200 Modem to an xMax network.
1.
Connect the PoE++ Power Supply power cable to a 110 to 240 VAC power source.
2.
If the CN3200 Modem is within range of an xMax Network, it connects within 2 minutes.
3.
The CN3200 Dual Band Routing Modem is now fully functional.
NOTES
If the CN3200 Modem fails to connect to an xMax network after two minutes have elapsed,
ensure that the power indicator on the Power Supply is glowing
GREEN
.
If the CN3200 Modem is within range of an operating xMax Network, but not connecting,
follow these steps to restart the CN3200 Modem:
Power off the CN3200 Modem by disconnecting the AC cord from the Power Supply.
Wait 60 seconds.
Reconnect the AC cord to power on the CN3200 Modem.
If the CN3200 Dual Band Modem still does not connect to the xMax Network, call the service
provider to report your problem.
