Name
Type
Quantity
Description
Serial port
RJ45
1
A port used for debugging. By
default, it serves as the OS
serial port. You can also set it
as the iBMC serial port on the
iBMC CLI.
NOTE
The port is a 3-wire serial
communication port, and its
default baud rate is 115,200 bit/s.
VGA port
DB15
1
Used to connect a display
terminal, such as a monitor or
KVM.
USB port
USB 3.0
2
Used to connect to a USB 3.0
device.
NOTICE
● The maximum current is 1.3 A
for an external USB device.
● Before connecting an external
USB device, ensure that the
USB device functions properly;
otherwise, it may adversely
impact the server.
● The USB 3.0 port can be used
to supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is
required.
PSU socket
-
2
Used to connect to a power
distribution unit (PDU) through
a power cable. You can select
the PSUs as required.
NOTE
When determining the PSUs,
ensure that the rated power of the
PSUs is greater than that of the
server.
5.3 Processors
●
The server supports one or two processors.
●
If only one processor is required, install it in socket CPU 1.
●
Processors of the same model must be used in a server.
FusionServer 1288H V7 Server
Technical White Paper
5 Hardware Description
Issue 02 (2023-05-25)
Copyright © xFusion Digital Technologies Co., Ltd.
20
