Choose a training program
Note: 1-9 Built-in 9 training modes with fixed parameters; custom parameters can be adjusted.
Evaluation mode
–
Evaluation mode: Collect the angle data generated by the Stim Unit during the patient's walking. The collection
duration is 60s by default and the maximum is 90s. The acquisition begins to draw an angle waveform and displays
the countdown of the acquisition time. Can stop in the middle. The acquisition is completed to display the
evaluation results.
–
Start: The App sends an evaluation mode to start the command to the Stim Unit, receives the Stim Unit reply, and
enters the evaluation work interface.
–
Stop: After long press and stop for 2s, send the evaluation mode stop command to the Stim Unit, receive the Stim
Unit 4 reply, and the evaluation mode stops.
–
The evaluation mode stops calculating the reference parameters based on the collected data. The collected data
needs to meet certain conditions before the reference parameters can be calculated, otherwise the prompts are
re-acquired.
Evaluation mode
Start evaluating
4.2.3 Shut down
When the instrument is turned on, press and hold the switch/mode composite button for 2 seconds to turn off the instrument.