15
Master Transmit Frequency (“MAS master transmit frequency”)
RF Configuration Menu option “3” is used to set the master transmit frequency (in
Hertz) of the radio within the limits of the radio certification. If the radio is a master,
then this is the frequency that it will use to transmit all messages to the slave(s). If the
radio is a slave, then this is the frequency that it will use to receive messages from the
master.
If a three digit number (with or without a decimal point and additional digits of
precision) is entered, the radio will interpret the entry as the frequency in MHz.
Slave Transmit Frequency (“MAS slave transmit frequency”)
RF Configuration Menu option “4” is used to set the slave transmit frequency (in Hertz)
of the radio within the limits of the radio certification. If the radio is a master, then this
is the frequency that it will use to receive messages from the slave(s). If the radio is a
slave, then this is the frequency that it will use to transmit all messages to the master.
If a three digit number (with or without a decimal point and additional digits of
precision) is entered, the radio will interpret the entry as the frequency in MHz.
Transmit Power
This parameter specifies the desired transmit power in milliwatts.
Current value = 10000 mW
Enter new value (1 - 10000) or Esc to exit:
MAS Master Transmit Frequency
This parameter specifies the transmit frequency in Hz (or MHz) to use in the
MAS band for the master radio. A slave radio uses this as its receive
frequency. This parameter is ignored in the ISM band.
Current value = 460000000 Hz
Enter new value (406100000 - 470000000) or Esc to exit:
MAS Slave Transmit Frequency
This parameter specifies the transmit frequency in Hz (or MHz) to use in the
MAS band for the slave radio. The master radio uses this as its receive
frequency. This parameter is ignored in the ISM band.
Current value = 465000000 Hz
Enter new value (406100000 - 470000000) or Esc to exit:
Содержание XETA4-TMFA
Страница 1: ...XETA4 TMFA User Manual Rev B...
