Next, select the USB port that your XSUSB Board is connected to from the Port pulldown
list. If you only have one XSUSB Board connected, then it will probably be USB0. (If no
USB ports appear in the pulldown list, then either the XSUSB Board is not working or
there was a problem installing the driver software.)
Now click on the TEST button to start the testing procedure. GXSTEST will configure the
FPGA to perform a test procedure on the XSA-3S1000 Board. The LED on the XSUSB
Board will blink during the FPGA configuration and testing processes. Within thirty
seconds you will see a
O
displayed on the LED digit if the test completes successfully.
Otherwise an
E
will be displayed if the test fails. A status window will also appear on your
PC screen informing you of the success or failure of the test.
Regardless of the result of the test, your XSUSB Board is operating correctly if you have
reached this point.
XSUSB INTERFACE BOARD V1.0 USER MANUAL
9
