manualshive.com logo in svg

Xerox WorkCentrePro 123 System administration, Руководство системного администратора

Поделиться
Скачать
Xerox WorkCentrePro 123 System administration Скачать руководство пользователя страница 82

7 TCP/IP (LPD or Port9100) 

82

Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide

Next, establish TCP/IP.

1.

Display the [System Settings] screen.

NOTE: 

For more information about how to display the [System Settings] screen, refer 

to the Setups chapter of the User Guide.

2.

Select [Network Settings].

3.

Select [Protocol Settings].

4.

Select [TCP/IP – Get IP Address] and [Change Settings].

5.

Select a method for establishing an IP address from, [DHCP], [BOOTP], [RARP], 
[DHCP/Autonet], or [Manual], and then select [Save].

NOTE: 

Use the DHCP server together with the Windows Internet Name Server 

(WINS) server.

If you selected [Manual] in step 5, then complete steps 6 to 11 to enter [Protocol 
Settings]. Otherwise, complete step 14.

6.

Select [TCP/IP – IP Address], then [Change Settings].

7.

Use the keypad on the screen to enter the IP Address for the machine in the 
format “xxx.xxx.xxx.xxx”. Enter relevant values (0 to 255) into the highlighted field 
and select [Next]. The next 3 digits are highlighted. When you have finished 
entering all values, select [Save].

8.

Select [TCP/IP – Subnet Mask], then [Change Settings].

9.

Using the same method as in step 7, enter the Subnet Mask.

10.

Select [TCP/IP – Gateway Address], then [Change Settings].

11.

Using the same method as in step 7, enter the Gateway Address.

NOTE: 

If you do not wish to set the Gateway Address, enter “0.0.0.0”.

12.

Select [TCP/IP - IP Filter], then [Change Settings].

13.

Select [On] to filter access to the machine.

NOTE: 

If you do not wish to use the IP filter feature, select [Off].

NOTE: 

Use CentreWare Internet Services to register the IP addresses which are not 

allowed to access the machine. Refer to the CentreWare Internet Services chapter of 
the User Guide.

14.

When you have finished establishing TCP/IP, select [Close] from the [Protocol 
Settings] screen.

Workstation Setup

Install print drivers on each client workstation that will be sending print jobs to the 
machine, and map to the machine as a printer. Refer to the HTML document in 
CentreWare Utilities CD-ROM or document provided with the optional PostScript Kit.

Содержание WorkCentrePro 123 System administration









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды