dc10cc0470
Customer Support
Page 17
Hole Punch
This command indicates hole punches for a print job on a device with hole punch capability.
PJL COMMENT Cmd
DSC Comment Cmd
PS Cmd
@PJL COMMENT
OID_ATT_PUNCH
int
;
%%OID_ATT_PUNCH
int
; <</Punch
int1
/PunchDetails <</Type 6 /NumHoles
int2
>>>>
Where
int
is:
0 = Punch Off
1 = Punch On
2 = Use 2 Hole Punch
3 = Use 3 Hole Punch
4 = Use 4 Hole Punch
Note:
int
1 will be emitted to invoke the default punch
setting on the device.
Note: Setting NumHoles to 1 causes a punch with the
default number of holes.
Where
int1
is:
0 for Punch Off
4 for Punch On after each showpage or copy page
operation.
Where
int2
is:
0 = Punch Off
1 = Punch On
2 = 2 Hole Punch
3 = 3 Hole Punch
4 = 4 Hole Punch
Note: Setting NumHoles to 1 causes a punch with the
default number of holes.
Fold
This command indicates an optional fold type generated by the professional finisher. The short edge feed command is
also required to use the booklet fold command.
PJL COMMENT Cmd
DSC Comment Cmd
PS Set Page
@PJL COMMENT
OID_ATT_FOLD
string
;
%%OID_ATT_FOLD
OID_VAL_FOLD_
string
;
/Fold
int1
/FoldDetails /Type 5 /FoldMethod
int2
Where
string
is:
TRIFOLDC
TRIFOLDZ
ZFOLD
Where
int1
is:
0 = No Fold
3 = Fold at end of set
Where
int2
is:
1 = TriFold C
2 = TriFold Z
3 = Z-Fold HalfSheet
Note:
TriFold C requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command to
insure SEF feeding.
TriFold Z requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command.
