dc10cc0470
Customer Support
Page 15
Simplex / Duplex Printing
This command specifies if a job is to print on one side or both sides of the sheet. Choose one of the methods below for
indicating this feature.
PS Cmd
See commands in table below
PCL5 Cmd
<Esc>&l
#
S
where # is the number assigned to the selection
PCL XL/6
See commands in table below
PostScript
PCL5
PCL
XL/6
one-sided /Duplex
false
/Tumble false
<Esc>&l0S
0xc0 0x00 0xf8 0x34
[ubyte eSimplexFrontSide attr_ubyte
SimplexPageMode]
Portrait
0xc0 0x00 0xf8 0x35 [ubyte
eDuplexHorizontalBinding attr_ubyte
DuplexPageMode]
two-sided-long-edge /Duplex
true
/Tumble false
<Esc>&l1S
Landscape
0xc0 0x01 0xf8 0x35 [ubyte
eDuplexVerticalBinding attr_ubyte
DuplexPageMode]
Portrait
0xc0 0x01 0xf8 0x35 [ubyte eDuplex
VerticalBinding attr_ubyte
DuplexPageMode]
two-sided-short-edge /Duplex
true
/Tumble true
<Esc>&l2S
Landscape
0xc0 0x00 0xf8 0x35 [ubyte
eDuplexHorizontalBinding attr_ubyte
DuplexPageMode]
Finishing Commands
Offset
This feature provides a physical offset of hard copy that distinguishes between sets or stacks within a job.
PJL SET Cmd
PS Cmd
@PJL SET JOBOFFSET=
string
<</Jog
int
>>
Where
string
is:
ON
OFF
Where
int
is:
0 = no offset
3 = offset each set
