Xerox WorkCentre 7500 Series, Руководство системного администратора

Страница: 165 / 195

Accounting
WorkCentre 7500 Series Multifunction Printer 165
System Administrator Guide
Enabling and Configuring Network Accounting
1. At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2. Touch
Accounting Settings
.
3. Touch
Accounting Mode
.
4. Touch
Network Accounting
to enable.
5. To customize the prompt that users see at the control panel, touch
Customize Prompts
, then select
the required prompt option from the drop-down menu: Display Prompt 1 and 2 , Display Prompt 1
Only , Display Prompt 2 Only , Display No Prompts . To set the prompt values:
a. Touch Prompt 1 Label , type an ID between 1–32 characters, then touch Save .
b. Touch Prompt 2 Label , type an ID between 1–32 characters, then touch Save .
c. Touch Prompt 1 Default Value , type an ID between 1–32 characters, then touch Save .
d. Touch Prompt 2 Default Value , type an ID between 1–32 characters, then touch Save .
e. To prevent typed information from being displayed on the control panel, touch Mask Entries ,
then touch Save .
6. Touch Code Entry Validation , and select one of the following:
a. Select
Enabled
to track copy, print, and scan usage information by User ID, Account ID, and
resources used by each user account. Users are required to type a valid User ID and Account ID
for every job.
b. Select Disabled to allow the printer to accept both valid and invalid User and Account IDs.
Disable code entry validation if you want to determine what the general usage baseline is for
any particular printer before requiring authentication controls. Users are still required to type at
least one character into the User ID and Account ID fields.
7. Touch Save , then touch Save again.
8. On your network accounting server, open the network accounting application.
9. Configure the application to define the destination for retrieval of data as the IP address or the fully
qualified domain name of the printer.