Features
WorkCentre 6015 Color Multifunction Printer
29
User Guide
Wired Network Setup
This menu provides the selections for setting up the printer for wired Ethernet network connections.
Notes:
This menu is the default network menu for the WorkCentre 6015N Color Multifunction Printer.
This menu appears on the WorkCentre 6015NI Color Multifunction Printer only when the
printer is connected to a wired network connection.
Item
Description
Ethernet
Specifies the Ethernet communication speed and the modes.
TCP/IP
Specifies the TCP/IP settings for the network.
IP Mode: Dual Stack or IPv4 Mode.
IPv4: Get IP Address, IP Address, Subnet Mask, or Gateway Address
Protocol
Select Enable when using the protocol. Select Disable to make the protocol unavailable.
LPR: The default setting is Enable.
Port9100: The default setting is Enable.
WSD: The default setting is Enable.
SNMP: The default setting is Enable.
Email Alerts: The default setting is Enable.
CentreWare Internet Services: The default setting is Enable.
LLTD: The default setting is Enable.
Bonjour (mDNS): The default setting is Enable.
Initialize NVM
Initializes network data stored in non-volatile memory. After executing this function and
restarting the printer, all network settings are reset to their default values.
Wireless Network Setup
This menu provides the selections for setting up the printer for wireless network connections.
Note:
This menu appears on the WorkCentre 6015NI Color Multifunction Printer when the printer is
not connected to a wired network connection.
Item
Description
Status
Displays the status of the wireless network connection.
Wireless Setup
Specifies the method used for setting up the wireless connection:
Manual Setup
WPS
Reset Wireless
Resets the wireless network settings to the default settings.
TCP/IP
Specifies the TCP/IP settings for the network.
IP Mode: Dual Stack or IPv4 Mode.
IPv4: Get IP Address, IP Address, Subnet Mask, or Gateway Address