Xerox WORKCENTRE 5050, Краткое руководство пользователя

Страница: 181 / 186

Quick Reference Guide Page 11-9
Troubleshooting
Image Loss
¾ When copying a document from a larger paper size to a smaller size, use Auto%
to reduce the image onto the smaller size.
¾ Use reduction i.e., copy at 90% instead of 100%.
¾ Select [Auto Center] and run the job again.
¾ If scanning from the Document Glass, select [Manual Platen Input] and define
the document size. Register the document in the right rear corner and copy with
the cover down.
¾ Do not use heavily embossed paper.
Blurred images on output
¾
Load fresh paper.
¾ If copying from the Document Glass, check the quality of the originals, set the
input to
Manual Platen Input , close the cover and try again. Ensure that the
original is entirely flat against the Document Glass.
Missing characters on output
¾ Load fresh paper.
¾
Try using a smoother paper.
¾ Select darken if the original is light or the font is colored.
Gloss variations (coining)
¾ Check the quality of the original.
¾ If the original has large areas of solid density, adjust the contrast.
Ghosting
¾ Check the quality of the original.
¾ Clean the Document Glass, if it is being used.
¾ Rotate the original 180 degrees and try the job again.
The machine cannot sense the size of the original on
the glass
¾ Select [Original Input] in the Image Adjustment tab and enter the size.
¾ Rescan the original, leaving the cover raised.