Xerox WorkCentre 5019, Дополнение к сети

Страница: 27 / 50

Xerox
®
WorkCentre
®
5019/5021
Network Addendum
27
When the optional Network Print Kit is installed, you can retrieve machine configuration information
from the print driver.
Note Update the machine configuration information when changing an optional component.
Using the Ethernet interface
You can send the machine's option configuration to the print driver automatically.
Notes
•
This feature is not available for some models. The optional Network Print Kit is required. For
more information, contact our Customer Support Center.
• When using this feature, activate the SNMP port. (Default: Enabled)
• If you failed to retrieve the machine configuration information or are using a USB interface
connection, set the machine configuration information manually. For more information, click
Help
on the screen to display the Help Information.
Follow the steps below to configure the options configuration.
1.
From the PC's Start menu, select Printer and Faxes to display the properties of the printer in use.
Note Some operating systems display “Printer” or “Devices and Printers” instead of “Printers and
Faxes.”
3 Adjusting foot Prevents the machine from toppling over. Move the machine to its
installation site and then rotate this adjuster in clockwise direction until it
touches a floor.
4 USB 1.1/2.0 interface
connector (Type B) Connect a USB 1.1/2.0 cable.
5 10BASE-T/100BASE-TX
interface connector Connect a network cable.
The 10BASE-T/100BASE-TX interface connector is available when the
optional Simple Network Print Kit is installed.
No. Component Description