Xerox WorkCentre 4250, Руководство по установке

Страница: 25 / 32

Troubleshooting
Xerox Common Access Card
Common Access Card Installation Guide
25
Troubleshooting Tips
The table below provides a list of problems and the possible cause and a recommended solution.
If you experience a problem during the installation process please refer to the During Installation
problem solving table below.
If you have successfully installed the Common Access Card solution but are now experiencing
problems, refer to
After Installation on page 26.
During Installation
Problem Possible Cause Solution
Card reader is installed but no
message displays on the User
Interface Card reader is faulty. • Try a different card reader.
• Contact the System
Administrator.
Card reader connection is faulty. • Check the cable is plugged in
correctly. Refer to Connect the
card reader to the Xerox device
on page 20 for instructions.
• Unplug the card reader cable
then plug back in.
• Plug the card reader into a
different USB port.
Card reader is not compatible. • Check that the card reader is
on the list of compatible
devices, refer to
Supported
Card Readers on page 7.
Common Access Card access is not
enabled on the machine.
• Enable CAC through the
Properties set up screens using
CentreWare Internet Services,
refer to
Software Enablement
on page 12.