Installation
Xerox Common Access Card
Common Access Card Installation Guide
21
Using Common Access Card
Once the
Common Access Card
has been enabled, each user must insert a valid card and enter their
Personal Identification Number (PIN) on the touch screen. When a user has finished using the Xerox
device, they are then required to remove their card from the card reader to end the session. For
instances where a user forgets to remove their card, the machine will end the session automatically
after a specified period of inactivity.
Follow the instructions below to use the
Common Access Card
:
1.
The
Authentication Required
window may be displayed on the touch screen, depending on your
device configuration.
2.
Insert your card into the card reader.
3.
Use the touch screen and numeric keypad to enter your PIN and then select
Enter
.
4.
If the card and PIN are authenticated, access is granted.
Note:
If the access attempt fails, refer to
5.
Complete the job.
6.
To end the session, remove your card from the card reader.
The current session is terminated and the
Authentication Required
window is displayed.
