Xerox Wireless Print Solutions Adapter, Руководство пользователя

Страница: 7 / 54

Xerox
®
Wireless Print Solutions Adapter
User Guide
7
1
Safety
General Guidelines
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your
Wireless Print Solutions Adapter.
If any of these conditions occur, do the following:
1. Remove power from the device.
2. Call an authorized service representative.
WARNINGS:
• Do not push objects into slots or openings on the adapters.
• Do not remove covers; there are no serviceable internal components
• Do not place objects on the adapters or power cord.
• Do not use outdoors.
• Do not place in an area where people can step on the power cord.
• Only use the power adapter provided; it is matched for use with the print adapter.
• Ensure that the Voltage (V) and Frequency (Hz) of your mains electrical outlet is within
the ranges stated on the power adapter.
• Plug the power adapter directly into a properly grounded electrical outlet.
• Do not wrap the power cord around the power adapter.
• When you disconnect the power adapter, pull on the plug; do not pull on the power
cord.
The following are hazards to your safety:
• The power cord is damaged or frayed.
• Liquid is spilled into a device.
• A device is exposed to water.
• The device emits smoke, or the surfaces are unusually hot.
• The device emits unusual noise or odors.
• The device causes a circuit breaker, fuse, or other safety device to activate.