Xerox Wireless Print Solutions Adapter, Руководство пользователя

Страница: 52 / 54

Regulatory
Xerox
®
Wireless Print Solutions Adapter
User Guide
52
with any other antenna or transmitter. End users must be provided with specific operating instructions for
satisfying RF exposure compliance.
Notice to Users in Canada
The Wireless Print Adapter does not exceed the Class B limits for radio-emissions.
CAN ICES-3 (B)/NMB-3(B)
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
As a License-Exempt Local Area Network (LE-LAN) device, there are operational restrictions:
(1) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile satellite systems;
(2) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725
MHz shall comply with the e.i.r.p. limit; and
(3) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with
the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-
5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN
devices.
Standards and Norms
Emissions and Immunity
European
• EN 300 328
• EN 301 489-01
• EN 301 489-17
• EN 301 893
• EN 61000-3-3
• EN 61000-3-2