FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide
7
COMMUNICATION PARAMETERS
This section lists the TCP/IP IP Address, Subnet Mask, and Default Gateway.
TCP/IP ENABLE displays ADVANCED when the 10/100 Ethernet Card/Port
on the controller (10/100/1000 Ethernet Card/Port for the YKE/YKE-N
controller) is activated at the Printer Control Panel.
CONTROLLER CONFIGURATION
:
Notice that the type of controller and FreeFlow Accxes Firmware version are
listed in this section.
ADVANCED NETWORK STATUS
: The Advanced Network HW Address is
the embedded NIC card and the address is used to redeem feature keys.
Status of the 10/100/1000 Ethernet Card/Port. READY shows that this is the
printer’s currently active TCP/IP network interface. DISABLED shows that the
card/port is not enabled. The card/port must display READY in order to
support Scan-to-Net, document retrieval, and Web Print Management Tool
functions.
DDS ENABLE:
When the DDS is enabled, the AccXES controller will
configure itself for use with a scanner. The YKE/YKE-N controller has DDS
automatically enabled. For the other controllers, this must be enabled in order
for the controller to communicate with the Scan System.
IMMEDIATE IMAGE OVERWRITE
(IIO): provides for immediate deletion and
verification of image data no longer needed by FreeFlow Accxes. It has
minimal impact on print and copy times because only areas of the disk that
have been written are deleted and verified. Note that enabling IIO doesn't
provide security for previously processed images. For full deletion and
verification, On-Demand Image Overwrite is recommended in conjunction with
enabling IIO.
OPTIONAL CONTROLLER FEATURES:
This section lists the standard features, and which ones require a feature key
license in order to activate them. The following is a list of the optional feature
keys.
XEROX WIDE FORMAT Scan System Features:
Scan-to-Net Feature Key
– to create an electronic file from a scanned
image.
Scan-to-Print Feature Key
– to scan, create a preview, and send the
scanned image to the printer when the Scan-to-Net feature is present.
Color Enablement Feature Key –
allows color scanning when the Scan-
to-Net feature is present. (shows in the Scanner Configurations section of
the test print)
Speed Enhancement Turbo II Feature Key
– 4 inches per second (ips)
for 36” wide media. (shows in the Scanner Configurations section of the
test print)
Speed Enhancement Turbo III Feature Key
–7.33 inches per second
(ips) for 36” wide media. (shows in the Scanner Configurations section of
the test print)
