FFaauullttss dduurriinngg tthhee SSeettuupp RRoouuttiinneess iinn tthhee SSttoocckk W
Wiizzaarrdd
Problem
Unable to run any of the setup routines, including calibration and profiling, or print custom barcodes
in the Stock Wizard while the press is busy.
Solutions
Before you perform any of the setup routines in the Stock Wizard, ensure that the press is not busy.
U
Unnaabbllee ttoo LLooaadd aa SSttoocckk iinn tthhee SSttoocckk W
Wiizzaarrdd
Problem
When there is a faulted job on the press, the Stock Wizard does not recognize loading of the paper
tray, or the action of opening and closing a paper tray.
Solutions
Clear all faulted jobs on the press, then scan the barcode again or load paper in the paper tray.
M
Muullttiiffeeeeddss,, M
Miissffeeeeddss,, aanndd PPaappeerr JJaam
mss iinn TTrraayyss 66––9
9
Problem
Multifeed or misfeed paper jams are occurring in Tray 6, 7, 8, or 9.
Solutions
Important:
The following solutions must be performed from the
PredictPrint Media Manager
application.
Tip:
All solutions provided are accessed from the
Advanced Stock Setup
feature.
For information, refer to the
.
1. Change the
Tray Air Assist
setting.
• Use this feature to adjust the amount of air volume generated by the tray blowers which assist
in separating sheets when feeding paper. When using light-weight or heavy-weight paper,
which stick together easily, select a stronger air flow setting in order to better separate sheets
and prevent paper jams or multifeeds.
• This feature can be found in
PredictPrint Media Manager > Stock Library > Stock Properties
> Advanced Setup > Tray Air Assist
.
• The settings available for this feature are:
313