Xerox Versant 4100 Press Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 68

Xerox Versant 4100 Press Скачать руководство пользователя страница 10

Power Saver Mode

The Power Saver feature allows the press to enter a reduced power consumption mode when all print
jobs have completed and there are no jobs currently processing. There are two power saving modes:
Low Power and Sleep.

• Low Power: After remaining inactive for a preset time period, the press enters the Low Power

mode.

• Sleep: After entering Low Power mode and remaining inactive for another preset time period, the

press enters the Sleep mode.

By default, the press automatically enters the Low Power mode after 15 minutes of inactivity. After
30 minutes of inactivity, the press then enters Sleep mode. These time intervals for both modes can
be changed by the system administrator.

Refer to the following example:

• Low Power Mode is set to 1 minute.

• Sleep Mode is set to 10 minutes.

• Sleep Mode activates after 10 minutes of total inactivity, and not 10 minutes after the Low Power

Mode begins.

LLoow

w PPoow

weerr M

Mooddee

In this mode, the power to the Control Panel and fuser unit is lowered to save power. The display goes
out and the Power Saver button on the Control Panel lights.

To exit the Low Power Mode, press the

Power Saver

button. The Power Saver button is no longer lit,

indicating that the Power Saver feature is canceled.

SSlleeeepp M

Mooddee

In this mode, the power is lowered more than in the Low Power mode. The display goes out and the
Power Saver button on the Control Panel lights.

To exit the Sleep Mode, press the Power Saver button. The Power Saver button is no longer lit,
indicating that the Power Saver feature is canceled.

EExxiittiinngg PPoow

weerr SSaavveerr M

Mooddee

The press exits Power Saver mode by pressing the

Power Saver

button on the Control Panel or when

receiving print data from an incoming job.

10

Xerox

®

Versant

®

4100 Press

Quick Start Guide

Getting Started

«
...
8
9
10
11
12
...
»

Содержание Versant 4100 Press





































































Отзывы:

Нет отзывов