Xerox Versant 180 Press Скачать руководство пользователя страница 55

Страница: 55 / 166

5. Select either Delete Outside or Delete Inside.
6. If the originals are 2-sided, select the applicable option:

• Both Sides
• Side 1 Only
• Side 2 Only

7. Select the Area 1 button.

The Delete Outside/Delete Inside Area 1 screen is displayed; use this screen to define
the first area for deletion (omission) from the copy output.

8. To define a specific area, enter the two X/Y coordinates within a range 0.0-17.0 inches

(0.0-431.8 mm). Navigate from coordinate to coordinate by selecting each X/Y button:

a) Select the Y1 box and use the numeric keypad on the control panel to enter the

value for Y1.

b) Select the Y2 box and use the numeric keypad on the control panel to enter the

value for Y2.

c) Select the X1 box and use the numeric keypad on the control panel to enter the

value for X1.

d) Select the X2 box and use the numeric keypad on the control panel to enter the

value for X2.

Clear a deletion area by selecting the Clear Area X (1, 2, or 3) button.

9. Select Save.

10. Select Save again.
11. Select any other desired copy features/options.
12. Enter the quantity.
13. Press Start.
14. Retrieve the copies from the output area.

Scan

Scan Overview

The Scan feature supports several methods for scanning and storing an original
document. This machine supports the following scan capabilities:

• Email: Scans a document and sends the scanned data as an e-mail attachment after

converting the data to TIFF, JPEG, PDF, DocuWorks

, or XPS (XML Paper Specification).

• Network Scanning: Scans a document using a job template that was created using

CentreWare

Internet Services (CWIS). When Scan to Home is enabled and the

Remote Access feature is available, the scanned data can be transferred to a different
destination according to an authenticated user.

• Scan to PC: Scans a document and sends the scanned data to a network computer

via the FTP or SMB protocol.

• Store to Folder: Scans a document and saves the scanned data in a folder on the

machine.

3-29

Xerox

Versant

180 Press

User Guide

Press Apps

Содержание Versant 180 Press







































































































































































Результаты поиска

Содержание Versant 180 Press

Отзывы:

Бренды по названию

Популярные бренды

Xerox Versant 180 Press, Руководство пользователя

Результаты поиска

Содержание Versant 180 Press

Отзывы:

Бренды по названию

Популярные бренды