Xerox Versant 180 Press Скачать руководство пользователя страница 136 | Manualshive

Страница: 136 / 166

Xerox Versant 180 Press Скачать руководство пользователя страница 136

Suggested Solutions

is transferred from the belt to the paper. However there are times when it is also used
with lightweight paper.

• This feature is accessed from Machine Status > Tools > Setup & Adjustment > Custom

Paper Settings. Select the desired Custom Paper > Change Settings > Adjust Image
Transfer > Change Settings.

• The Adjust Image Transfer procedure can be performed by selecting either Auto or

Manual.

Note

An automatic adjustment fixes most image quality issues. Always perform the Auto
procedure before performing the Manual adjustment.

-

Auto: The adjustment is done automatically by the press. It eliminates the need
for you to interpret printed targets, and manually enter adjustment values. This
saves time and avoids errors.

-

Manual: The user must manually perform the adjustment, including printing test
patterns, interpreting the printed targets on those patterns, and then manually
entering the adjustment values.

Tip

Use the Manual adjustment option only when the Auto adjustment does not
provide the desired output.

-

For detailed information and instructions on using the Auto and Manual adjustment
options, refer to the System Administration Guide“.”.

2.

If the issue is observed on the tail edge of the printed output and is not corrected by per-
forming a Adjust Image Transfer, change the Adjust Image Transfer for Trail Edge
setting.

• Use this feature to adjust the voltage ratio on the secondary bias transfer roll (2

nd

BTR);

this is where the image is transferred from the belt to the paper.

• This feature is accessed from Machine Status > Tools > Setup & Adjustment > Custom

Paper Settings. Select the desired Custom Paper > Change Settings > Adjust Image
Transfer for Trail Edge > Change Settings.

• Decrease the Adjust Image Transfer for Trail Edge in increments of 10%. After every

incremental adjustment, run test prints and evaluate the output to determine if addi-
tional adjustment is necessary.

3.

Perform an Automatic Density Uniformity Adjustment.

Note

This is a press feature and is not a Custom Paper Settings feature.

• Use this feature to correct image quality issues on the output when that image quality

is not consistent throughout the entire output. For example, the image quality is lighter
(faded) or heavier (thicker) on the left or right sides of the output (inboard / outboard).

• For information and instructions on how to use this feature, refer to the System Admin-

istration Guide, Density Uniformity Adjustment.

Xerox

®

Versant

®

180 Press

6-14

User Guide

Troubleshooting

«
...
134
135
136
137
138
...
»

Содержание Versant 180 Press







































































































































































Отзывы:

Нет отзывов