Xerox Telecopier 7017, Техническое справочное руководство

Страница: 36 / 194

4. Repair / Adjustment
Introduction 4-2
●
Covers and Panels
REP 1.1 Document Catch Tray Assembly 4-3
●
REP 1.2 RH Cover 4-3
●
REP 1.3 Coupler Cover 4-4
●
REP 1.4 LH Cover 4-4
●
REP 1.5 Output Tray Assembly 4-4
●
REP 1.6 Rear Cover 4-5
●
REP 1.7 Upper Scan Cover 4-5
●
REP 1.8 Lower Scan Cover 4-5
●
REP 1.9 Input Tray / Printer Cover Assembly 4-6
●
REP 1.10 Input Tray Extension 4-6
●
REP 1.11 Paper Side Plates 4-6
●
ADF
REP 2.1 Retard Assembly 4-7
●
REP 2.2 Nudger Timing Gear 4-7
●
REP 2.3 Pad Assembly 4-8
●
REP 2.13 Nudger Solenoid Assembly 4-14
●
REP 2.14 Nudger Pawl and Nudger Pawl Spring 4-15
●
Scanner
REP 3.1 Scan Position Sensor 4-15
●
REP 3.2 Scan Interlock Switch 4-16
●
REP 3.3 Scan Input Idler Roller 4-17
●
REP 3.4 Platen Roller 4-17
●
REP 3.5 Scan Output Idler Roller 4-18
●
REP 3.6 Upper Scan Assembly 4-18
●
REP 3.7 Video Assembly 4-19
●
REP 3.8 Scan Pulley / Gear 4-20
●
REP 3.9 Scan Input Drive Roller 4-20
●
REP 3.10 Scan Output Drive Roller 4-21
●
REP 3.11 Scan Output Drive Pulley 4-21
●
REP 3.12 Scan Motor 4-22
●
4. Repair / Adjustment
http://xww.xedoc.world.xerox.com/data/XEDOC/Central/Fax/7017/TECH/section4.htm (1 of 3) [28/09/1999 11:36:44]
www.printcopy.info
www.printcopy.info