Solving Print-Quality Problems
Phaser® 7760 Color Laser Printer
4-17
Print Area Is Not Centered on the Paper
Problem
The printed area appears outside the margins on the page.
Solution
1.
On the control panel, select
Paper Tray Setup
, and then press the
OK
button.
2.
Select the tray you are using, and then press the
OK
button.
3.
Verify that the tray is set to the correct paper size.
4.
If the problem continues, use the Calibrate Margins page to shift the print area on the
paper. The print area appears as a dashed rectangle on the Calibrate Margins page; the
printer does not print outside this rectangle.
a.
On the control panel, select
Troubleshooting
, and then press the
OK
button.
b.
Select
Print Quality Problems
, and then press the
OK
button.
c.
Select
Calibrate Margins
, and then press the
OK
button.
d.
Select
Calibrate Margins Page
, and then press the
OK
button.
e.
Select the appropriate tray to calibrate, and then press the
OK
button.
f.
Follow the instructions on the Calibrate Margins page.
See also:
Advanced Features Guide
at
www.xerox.com/office/7760support
Содержание Phaser 7760
Страница 115: ...Adding Staples Phaser 7760 Color Laser Printer 5 11 6 Close the finisher door 7760 003...
Страница 117: ...Emptying the Punch Waste Box Phaser 7760 Color Laser Printer 5 13 5 Close the finisher door 7760 003...
Страница 126: ...Clearing Paper Jams Phaser 7760 Color Laser Printer 6 6 4 Close Left Door D 7760 030...
