Phaser 6700 Printer Service Manual
Xerox Internal Use Only
9-3
•
SSSSSS
= Six digit numeric serial number based on the following table. The
serial numbers are reset only when the ending number is reached or when the
revision number is rolled
c = Check digit.
Examples
Xerox Serial Number = AB9774072
Product code for 110V printer = AB9
Serial number for 6700_N or 6700_DN = 774072
Xerox Serial Number = 3170057367
Manufacturing location code for 220V printer = 317
Serial number for 6700V_DN = 005736
Check digit = 7
Using the Parts List
Note
Parts with part numbers are available for order. Parts without part numbers
are only available with the parent assembly.
•
Item:
The item number in the parts diagram.
•
Name/Description:
Part nomenclature and number of parts per order.
•
Part Number:
The part number to order that specific part.
•
Parts are referenced
PL#.#.#
; For example, PL3.1.10 means the part is item 10
of Parts List 3.1.
•
A black triangle preceding a number followed by a parenthetical statement in
the parts diagram means the item is a parent assembly, made up of the
individual parts called out in parentheses.
•
The notation “
with X~Y
” following a part name indicates an assembly made
up of components X through Y. For example, “1 (with 2~4)” means part 1
consists of part 2, part 3, and part 4.
•
An asterisk (*) after a part indicates the page contains a note about this part.
•
The notation “
J1<>J2 and P2
” is attached to a wire harness. It indicates
connector Jack 1 is attached to one end of the harness and connector J2 is
attached to the other end plugged into P2.
•
Fastener location and type are indicated using designators. Refer to “Fastener
Types” on page 8-5 for a complete list of fasteners used, and “Hardware Kit -
604K56670” on page 9-102 for fasteners available in the Hardware Kit.
Product
Starting Serial Number
Ending Serial Number
6700V_DN, 220V Engine
001001
100500
Designator
Fastener Type
E
E-ring
KL
K-clip
ST
Screw, self-tapping
SM
Screw, sheet metal
www
MK-Electronic
de
