9-100
Xerox Internal Use Only
Phaser 6700 Printer Service Manual
Xerox Supplies and Accessories
Toner Cartridges are available in metered or regional versions. Printers are shipped
from the factory with neutral cartridges that are set for metered use at power up or
adopt the region when the first non-neutral cartridge is installed. Two regional
variants, North America / Xerox Europe (NA/XE) and Developing Markets
Operations (DMO) are available.The table lists Toner Cartridge part numbers for
metered or regional versions. Neutral appears as the cartridge type until metered
toner is enabled or a regional (NA/XE or DMO) cartridge is inserted.
Note
Toner level in the cartridge is determined by auger turns and sensors. Toner
level is set to 100% when a new cartridge is installed. Toner Cartridge life (A/
A4 pages at 5% coverage) is 12K for CMY, 18K for K for hi-cap, 15K for CMY,
21K for K for metered, and 5K for CMY, 7.1K for K for standard and neutral.
Note
Imaging Unit life is determined by number of prints, cycles (rotation time) and
pixel count (dispense time). Life is 50K pages with 4 page per job average and
< 15% coverage.
Waste Toner status is determined by a sensor for almost full and a page count
after that for full. Life should be about 25 K A/A4 pages at 5% coverage per
toner, 20% cumulative, to almost full and another 3600 pages to full.
The Maintenance Kit life is determined by page count. Life is 150K A/A4 pages
to a near end of life warning, approximately 180K A/A4 pages to end of life
error hard stop.
Toner Cartridge Types
Region/Type
Description
Capacity
NA/XE/DMO
Cyan Standard Capacity
5,000
Magenta Standard Capacity
5,000
Yellow Standard Capacity
5,000
Black Standard Capacity
7,100
Cyan High Capacity
12,000
Magenta High Capacity
12,000
Yellow High Capacity
12,000
Black High Capacity
18,000
Metered
Cyan Metered
15,000
Magenta Metered
15,000
Yellow Metered
15,000
Black Metered
21,000
www
MK-Electronic
de
