Xerox PHASER 6140, Руководство пользователя

Страница: 89 / 170

Printing
Phaser 6140 Color Laser Printer
User Guide
89
2. In the application you are printing from, open the Print dialog box and select the Phaser 6140 PCL
driver.
3. Click the
Properties
button.
4. Click the
Advanced
tab.
5. In the Other Settings section, in the Items list, select
Electronic Sort
. In the Electronic Sort field
below the Items list, select Off .
6. Click the Paper/Output tab and do the following:
a. From the Paper Tray list, select Tray 1 .
b. From the 2-Sided Print list, select either Flip on long edge (Manual) or Flip on short edge
(Manual)
.
c. From the Paper Type field, select the paper type.
d. Select any other desired settings and then click
OK
.
7. In the Print dialog box, select the pages to print and then click
OK
(or
Print
) to start printing.
Note: You do not need to select to print odd or even pages only. Either select to print all pages or a
page range. The driver will print the even pages first and then the printer will wait for you to re-
insert the printed pages back into Tray 1.
8. The Setting Method for Paper Tray 1 Duplex window appears on your computer screen. Keep this
window open until you are finished with the entire print job, since you cannot get it back once you
close it. This window explains how to reload the printed pages into the paper tray. However, in case
you did close the window, do the following: without turning the pages over or around, lift them as
they are and place them into the paper tray. If you have done this correctly, the blank side of the
pages will be facing up. Close the tray.
9. On the printer control panel, click the OK button to resume printing.
Performing Manual 2-sided Printing from the Manual Feed Slot
1. After printing on one side of a sheet of paper, adjust the paper guides in the manual feed slot to fit
the paper.
2. Slowly and evenly insert the paper (one sheet only) into the manual feed slot with the side to be
printed on facedown . The printer will “grab” and hold the paper.
3. If the paper looks skewed after the printer pulls it in, gently remove the paper and re-insert it.
4. Open the file to be printed if it is not already open and then select
Print from the File menu.
5. In the Print dialog box, select the desired printer driver and then click the Properties button.
6. In the Paper/Output tab, select the following:
a. From the Paper Size list, select the paper size.
b. From the Paper Type list, select the paper type.
c. From the Paper Tray list, select
Manual Feed Slot .
7. Click OK .
8. In the Print dialog box, select the page you want to print on the sheet and then click Print (or OK )
to start printing.