Control Panel Menus
Phaser® 6130 Printer
5-3
Changing Menu Settings
Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode.
1.
To display the menu screen, press the
Menu
button at the print screen.
2.
Press the
Up Arrow
or
Down Arrow
button until
Admin Menu
is displayed, and then
press the
Forward Arrow
or
OK
button.
3.
Press the
Up Arrow
or
Down Arrow
button until
System Setup
is displayed, and then
press the
Forward Arrow
or
OK
button.
4.
Press the
Up Arrow
or
Down Arrow
button until
PowerSaver Time
is displayed, and
then press the
Forward Arrow
or
OK
button.
5.
Press the
Up Arrow
or
Down Arrow
button to change the number of minutes that the
printer will wait before entering Power Saver mode.
6.
Press the
OK
button to confirm your settings. The settings that have been confirmed are
displayed with the affix “*”.
7.
Press the
Menu
button to quit the menu operation and return to the print screen.
8.
Ready to print.
Note:
If you want to change values after you have confirmed them by pressing the
OK
button,
you need to set them from the start again.
Initializing Configured Values
Display the item you want to initialize, and then press both the
Up Arrow
and
Down Arrow
buttons at the same time.
Once the change process is completed, the factory defaults will be displayed. Press the
OK
button to confirm the value.