Initial Setup at the Control Panel
Phaser® 6128MFP Multifunction Printer
28
Initial Setup at the Control Panel
This section includes:
•
Assigning the Printer’s Network Address
on page 28
•
Enabling the Printer for Faxing
on page 29
•
Enabling the Printer for Scanning
on page 30
The first time you turn the printer on, the Initial Setup menu will provide you with an
opportunity to:
•
Set the language, date, and time.
•
Change the network address acquisition method.
•
Specify the fax phone number, so the printer can receive a fax.
•
Set up advanced fax settings.
Note:
After you have exited the Initial Setup menu, you can return to it by pressing the
System
button, then
Admin Menu > System Setup
>
Power On Wizard
.
Assigning the Printer’s Network Address
The printer is set by default to be automatically recognized by the network, acquiring an IP
address using DHCP. Network addresses assigned by DHCP are temporary. After a specified
time, the network may assign a new IP address to the printer.
If your network administrator requires a static IP addresses for the printer, or you do not
want the IP address of the printer to change, you must assign a network address to the
printer manually.
Allowing the IP Address to be Assigned Automatically
If your printer is connected to a network that has a DHCP server, an IP address will be
assigned when you turn the printer on.
If you are connected to a network that does not have a DHCP server, and you want the IP
address assigned automatically, do the following:
1. On the control panel, use the up or down arrow to select
Network Settings
from the
Initial Setup menu.
2. Select
AutoIP
from the list, and press the
OK
button.
3. Use the down arrow to select
Exit Menu
, then select
Yes
to exit the menu.
An IP address will be assigned when you turn the printer on.
Note:
To return to the Initial Setup menu, press the
System
button, then
Admin Menu >
System Setup
>
Power On Wizard
.
Specifying a Static IP Address
To assign a static IP address to the printer:
1. On the control panel, use the up or down arrow to select
Network Settings
from the
Initial Setup menu.
2. Select
Panel
from the list, and press the
OK
button.
Содержание Phaser 6128 MFP
Страница 24: ...Phaser 6128MFP Multifunction Printer 24...
Страница 68: ...Phaser 6128MFP Multifunction Printer 68...
Страница 88: ...Phaser 6128MFP Multifunction Printer 88...
Страница 162: ...Phaser 6128MFP Multifunction Printer 162...
