Control Panel
Phaser® 4510 Laser Printer
1-9
1.
On the control panel, select
Information
, and then press the
OK
button.
2.
Select
Information Pages
, and then press the
OK
button.
3.
Select
Configuration Page
or
Supplies Usage Page
, and then press the
OK
button to
print.
Note:
You can also print information pages from CentreWare Internet Services (IS) and from
the printer driver.
Sample Pages
Your printer comes with a set of sample pages that demonstrate different printer functions.
To print the sample pages:
1.
On the control panel, select
Information
, and then press the
OK
button.
2.
Select
Sample Pages
, and then press the
OK
button.
3.
Select the desired sample page, and then press the
OK
button to print.
See also:
Advanced Features Guide
at
www.xerox.com/office/4510support
Power Saver Settings
Factory Default:
■
Power Saver: On
■
Power Saver Timeout: 4 minutes
You can change the default power saver time on the control panel or through CentreWare IS.
Using the Control Panel:
1.
On the control panel, select
Printer Setup
>
Printer Controls
, then press the
OK
button.
2.
Verify that
Power Saver
is
On
. If Power Saver is
Off
, then select
Power Saver
and press
the
OK
button to switch between
Off
and
On
.
3.
Select
Power Saver Timeout
to select the new time.
4.
Press the
OK
button.
Using CentreWare IS:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s Address field.
3.
Select
Properties
.
4.
Select the
General
folder on the left nagivation panel, then click
Printer Defaults
.
5.
In the
User Preferences
section, set the
Power Saver
option to
On
.
6.
Select the new time from
Power Saver Timeout
.
7.
Click the
Save Changes
button.
