Printing on Specialty Media
Phaser® 4510 Laser Printer
3-45
7.
If you selected
New Custom Size
, select the custom width and height:
a.
For
Short Edge
, use the
Up Arrow
and
Down Arrow
buttons to specify the short
edge, and then press the
OK
button.
b.
For
Long Edge
, use the
Up Arrow
and
Down Arrow
buttons to specify the long
edge, and then press the
OK
button.
c.
If the control panel prompts you for the
Paper Orientation
, use the
Up Arrow
and
Down Arrow
buttons to select the direction you are feeding the paper into the tray.
Note:
When you define a new custom size, it is stored in the printer so it can be used
again. Up to five custom sizes can be stored in the printer. If you define a new custom size
after five custom sizes have been stored, the new custom size replaces the least recently
used.
8.
Either use the custom size as the document size in the application or select the appropriate
tray as the paper source.
Creating Custom Paper Types
Custom paper types are created in CentreWare IS and appear in the printer driver, control
panel, and CentreWare IS. Use this feature to create your own custom paper type with specific
settings that you can reuse for routine print jobs, for example, monthly reports.
To create custom paper types:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left navigation panel.
5.
Select
Custom Paper Types
.
6.
Enter or modify the settings, and then click
Save Changes
at the bottom of the page.
Note:
For more information about creating custom paper types, click the
Help
button on the
Properties
tab to view the online help.
Long-Edge Feed
Short-Edge Feed
4510-114
4510-113