![background image](http://html2.mh-extra.com/html/xerox/phaser-4510/phaser-4510_advanced-features-manual_3406194050.webp)
Printer Settings
Phaser® 4510 Laser Printer
4-5
Controlling Startup Page Printing
The printer can produce a Startup page each time the printer is turned on or reset. The factory
default is
On
. You can print the Startup page at any time from the
Information Pages
menu.
To turn on/off automatic printing of the Startup page, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the Startup page on the control panel:
1.
Select
Printer Setup
, and then press the
OK
button.
2.
Select
Printer Controls
, and then press the
OK
button.
The
Startup Page
is highlighted. The end of the line displays the setting (
On
or
Off
).
3.
Press the
OK
button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the Startup page using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
General
folder on the left navigation panel.
5.
Select
Printer Defaults
.
6.
In the
Startup Page
drop-down list, select
Off
or
On
to change the setting.
7.
Click the
Save Changes
button at the bottom of the page.
Printing the Startup Page from the Control Panel
To print the Startup page on the control panel:
1.
Select
Information
, and then press the
OK
button.
2.
Select
Information Pages
, and then press the
OK
button.
3.
Select
Startup Page
, and then press the
OK
button to print.